| View previous topic :: View next topic |
| Author |
Message |
willg
Lieutenant Commander
Joined: 29 Apr 2014
Posts: 202
|
 Posted: Tue Apr 29, 2014 1:50 pm Post subject: Nova Drive 3-Z questions. |
 |
|
Hey all, new guy here looking for some advice/ opinions.
The 3-Z light freighter came to my attention latley, it was based on the old YT-1200 design.
My question is, if a 3-Z is based on a CEC design could YT series, or even YV series parts be used to repair or upgrade a ship? Im personally in favour of it, but I guess I wanted to discuss this with you folks. Theres no discussion on this matter although thete are reams on YT-1300s, naturally.
Also, according to the Alliance Deckplans website, the 3-Z has a Decentralised hyperdrive. What I gather is theres no designated main or backup drives. Both being activared gives a Multiplyer of X2, but if only one is active its X15.
If one was to upgrade the hyperdrive, should you upgrade both or should you alter the systems so it becomes a standard main drive and backup system?
Thanks folks, hope I have been clear in my use of terminology.
Will G |
|
| Back to top |
|
 |
garhkal
Sovereign Protector
Joined: 17 Jul 2005
Posts: 14173
Location: Reynoldsburg, Columbus, Ohio.
|
| Posted: Tue Apr 29, 2014 2:23 pm Post subject: |
|
|
I've always gone with both need to be replaced cause of that linking up they do.
AS to part cross over.. Yes, but i always had it at a +3-5 modifier to the diff #.
_________________
Confucious sayeth, don't wash cat while drunk! |
|
| Back to top |
|
|
willg
Lieutenant Commander
Joined: 29 Apr 2014
Posts: 202
|
| Posted: Tue Apr 29, 2014 2:34 pm Post subject: |
|
|
Right, yeah.
So if the specs say main X2 Backup X15 , if mpdified to X1 for main does baclup increase too? How much? |
|
| Back to top |
|
|
willg
Lieutenant Commander
Joined: 29 Apr 2014
Posts: 202
|
| Posted: Tue Apr 29, 2014 2:45 pm Post subject: |
|
|
| Forgive typos, btw . Bumpy road, on a bus lol. |
|
| Back to top |
|
|
DougRed4
Rear Admiral
Joined: 18 Jan 2013
Posts: 2272
Location: Seattle, WA
|
| Posted: Tue Apr 29, 2014 4:49 pm Post subject: |
|
|
Welcome to the Pit, willg! 
_________________
Currently Running: Villains & Vigilantes (a 32-year-old campaign with multiple groups) and D6 Star Wars; mostly on hiatus are Adventures in Middle-earth and Delta Green |
|
| Back to top |
|
|
The Brain
Lieutenant Commander
Joined: 03 Jun 2005
Posts: 242
|
| Posted: Tue Apr 29, 2014 6:22 pm Post subject: Re: Nova Drive 3-Z questions. |
|
|
| willg wrote: | Hey all, new guy here looking for some advice/ opinions.
The 3-Z light freighter came to my attention latley, it was based on the old YT-1200 design.
My question is, if a 3-Z is based on a CEC design could YT series, or even YV series parts be used to repair or upgrade a ship? Im personally in favour of it, but I guess I wanted to discuss this with you folks. Theres no discussion on this matter although thete are reams on YT-1300s, naturally.
Also, according to the Alliance Deckplans website, the 3-Z has a Decentralised hyperdrive. What I gather is theres no designated main or backup drives. Both being activared gives a Multiplyer of X2, but if only one is active its X15.
If one was to upgrade the hyperdrive, should you upgrade both or should you alter the systems so it becomes a standard main drive and backup system?
Thanks folks, hope I have been clear in my use of terminology.
Will G |
Short answer: It's your game do whatever you like!
Long Answer: I'm really dubious of RADP's arguements since some of them seem to be based on semantics, they seem to thing the word "stretching" only applies to changes in length. The whole dispersed hyperdrive thing is just their theory that they seem to have come up with on their own with no mention made of it in any of the official descriptions of the 3-Z. On top of that it seems foolish of Nova Drive wanting to cash in on the reputation of the YT series to make a design change that would make it more likely to break down ("GAME NOTES: This ship is equipped with a decentralized hyperdrive system. If both units are in working order, the ship has a hyperdrive rating of X2. If only one of these units is working, the ship functions at its backup speed of X15."). All of the replacment hyperdrives in Galaxy Guide 6: Tramp Frieghters are stand alone units including the ones made to be used only as backup hyperdrives. IMO that would also apply to the issue of parts it would not be a prime selling point if the ship was not cross/backwards compatible with CEC, especially since CEC/YT series parts would be some of the most common on the market. |
|
| Back to top |
|
|
willg
Lieutenant Commander
Joined: 29 Apr 2014
Posts: 202
|
| Posted: Tue Apr 29, 2014 8:03 pm Post subject: |
|
|
Thanks, and yes I concur on what you said. I do love Galaxy guide 6, and it certainly comes in handy.
The appeal of the Nova Drive 3-Z is its a bit different, not as common as the Yt-1300 yet linked to it, by lineage. |
|
| Back to top |
|
|
garhkal
Sovereign Protector
Joined: 17 Jul 2005
Posts: 14173
Location: Reynoldsburg, Columbus, Ohio.
|
| Posted: Wed Apr 30, 2014 2:22 am Post subject: |
|
|
| willg wrote: | Right, yeah.
So if the specs say main X2 Backup X15 , if mpdified to X1 for main does baclup increase too? How much? |
I'd prob drop it to x10 or x12.
_________________
Confucious sayeth, don't wash cat while drunk! |
|
| Back to top |
|
|
willg
Lieutenant Commander
Joined: 29 Apr 2014
Posts: 202
|
| Posted: Wed Apr 30, 2014 6:30 am Post subject: |
|
|
| Right, yeah, its STILL double figures but its low double figures. Excellent. Thanks folks. |
|
| Back to top |
|
|
willg
Lieutenant Commander
Joined: 29 Apr 2014
Posts: 202
|
| Posted: Tue May 13, 2014 10:58 pm Post subject: |
|
|
Just in process of Specing out my 3-Z, perhaps in an idealised fashion. I have found the Alliance Deckplans layouts useful and preferrable to the one from Stock Ships, which im taking to be a rough draft.
I am also pleased that by modifying the interior, according to the Alliance Deckplans, it is pissible to increase the cargo capacity by modifying the interior from 150 tons to 200.
This has allowed some capacity for upgrades without cutting into cargo space tool much |
|
| Back to top |
|
|
CRMcNeill
Director of Engineering
Joined: 05 Apr 2010
Posts: 16282
Location: Redding System, California Sector, on the I-5 Hyperspace Route.
|
| Posted: Wed May 21, 2014 12:19 am Post subject: |
|
|
It's worth noting that most of the ships in the SWU have some form of distributed drive system, at least for sublight. Having something similar for a hyperdrive is not outside the realm of possibility. A while back I worked on a concept for a Build-Your-Own-Stardrive Chart, with the idea being that you started with a basic, generic drive type (speed, cost, availability & weight) to which you then applied descriptive templates to flesh out the drive. In this case, a distributed drive would (IMO) increase the difficulty to modify the drive by 1 level (as you have to make multiple modifications rather than just one) but reduce any engine damage by 1 level (damage to one of multiple drives will be less critical than it would if the ship only had one drive to damage).
_________________
"No set of rules can cover every situation. It's expected that you will make up new rules to suit the needs of your game." - The Star Wars Roleplaying Game, 2R&E, pg. 69, WEG, 1996.
The CRMcNeill Stat/Rule Index
|
|
| Back to top |
|
|
|
