| View previous topic :: View next topic |
| Author |
Message |
Fallon Kell
Commodore
Joined: 07 Mar 2011
Posts: 1846
Location: Tacoma, WA
|
 Posted: Mon Aug 15, 2011 2:31 pm Post subject: |
 |
|
| Bren wrote: | | I llike the look. I might use that for the dependent NPC in our game who uses gunpowder firearms. |
Thanks. Feel free to use it!
_________________
Or that excessively long "Noooooooooo" was the Whining Side of the Force leaving him. - Dustflier
Complete Starship Construction System |
|
| Back to top |
|
 |
Fallon Kell
Commodore
Joined: 07 Mar 2011
Posts: 1846
Location: Tacoma, WA
|
|
| Back to top |
|
|
thedemonapostle
Commander
Joined: 02 Aug 2011
Posts: 257
Location: Texas
|
| Posted: Thu Jan 05, 2012 5:00 pm Post subject: |
|
|
look up the stats for the chiappa rhino
http://chiappafirearms.com/product/729
it too fires from the 6 o'clock position, ie from the bottom of the cylinder.
also doing a quick dimension check of your sketch, i got roughly 21" long and approximately 9" tall. this is based on the length of a .30-06 round, 3.34" (85 mm) and then lengthening the cylinder a bit to allow for room and such, i put the cylinder at 4" long. which in turn gives it a 12" barrel and about a 4-5" handle.
_________________
Aim low, shoot high
I'm a pirate, need I say more?
d6holocron.com: Thedemonapostle
Thedemonapostle Star Wars Crossovers |
|
| Back to top |
|
|
Fallon Kell
Commodore
Joined: 07 Mar 2011
Posts: 1846
Location: Tacoma, WA
|
| Posted: Thu Jan 05, 2012 7:21 pm Post subject: |
|
|
Yeah, I read several articles on the Mateba (the basic model for the Chiappa Rhino) before I drew up the original Ancalagon.
I think the length of the cylinder may be 3.5 inches on the original sketch. On the SketchUp file, the height is about 7 5/8 inches, the gun is just under 18 inches long, and the cylinder is 3.5 inches long
_________________
Or that excessively long "Noooooooooo" was the Whining Side of the Force leaving him. - Dustflier
Complete Starship Construction System |
|
| Back to top |
|
|
|
